AR Tiling | Tiling Specialists
AR TILINGTiling specialists

AR Tiling · Tiling specialists · UK-wide

Tiling specialists. Laid right, built to last.

Homes across Greater Manchester and contracts anywhere in the UK. Bathrooms, wet rooms, kitchens, floors, outdoor and commercial. You choose the tiles, we fit them, whatever they are. No job is too difficult.

  • Free, no-obligation quotes
  • No job too difficult
  • Team ready, UK-wide
  • Loyal customers save 10%
Set out from the centre line600 × 600 mm · 2 mm joints
Free written quotesA fixed price before any work starts
No job too difficultEvery tile, every size, every surface
UK-wide teamHomes locally, contracts nationwide
Guaranteed work[e.g. 2-year workmanship guarantee]
Qualified & insuredFully insured, qualified tilers. [£ cover]

Services

Every kind of tiling, start to finish

From a splashback to a whole house of floors. Old tiles off, walls and floors prepared, new tiles laid, grouted and sealed.

Walls · floors · en-suites

Bathrooms

Full bathroom and en-suite tiling, from floor to ceiling or half height.

  • Feature walls and niches
  • Mitred and trimmed edges
  • Re-grouting and repairs
More about bathrooms →

Tanked · fully waterproof

Showers & wet rooms

Walk-in showers and wet rooms, waterproofed before a single tile goes on.

  • Tanking membranes and kits
  • Cement board, not plasterboard
  • Falls to the drain on wet-room floors
More about showers & wet rooms →

Splashbacks · floors

Kitchens

Splashbacks cut neatly round sockets and worktops, and hard-wearing kitchen floors.

  • Metro, mosaic and large-format
  • Clean cuts round sockets
  • Kitchen floors laid before or after units
More about kitchens →

Porcelain · large-format · stone

Floors

Hallways, kitchens, conservatories and whole-house floors.

  • Large-format tiles up to 1200 × 600 mm
  • Levelling systems for a flat finish
  • Over underfloor heating
More about floors →

Patios · porches · steps

Outdoor

Outdoor porcelain for patios, porches, paths and steps, laid to shed water.

  • 20 mm outdoor porcelain
  • Frost-resistant adhesive and grout
  • Steps and edges finished neatly
More about outdoor →

Shops · offices · hospitality

Commercial

Tiling for shops, offices, restaurants, salons and rented properties.

  • Work planned around opening hours
  • Hard-wearing commercial tiles
  • Landlord and letting-agent jobs
More about commercial →

Tile guide

Every type of tile, and where it works

Whatever you pick at the tile shop, we fit it. Here's every common type of tile, where it suits, and what it typically costs to buy. Prices are for the tiles only, per square metre.

Ceramic

Glazed clay tiles. Light, easy to cut and the widest choice of colours. Best on walls and light-use floors.

Best for
Bathroom and kitchen walls
Tiles from
£10–£50 /m²

Porcelain

Denser and harder than ceramic, and soaks up almost no water. Strong enough for any floor, wet room or heated floor.

Best for
Floors, showers, wet rooms
Tiles from
£20–£90 /m²

Large-format porcelain

Tiles from 600 × 600 mm up to 1200 × 600 mm and bigger slabs. Fewer grout lines and a clean, modern look. Needs a very flat surface and a levelling system.

Best for
Open-plan floors, feature walls
Tiles from
£35–£150 /m²

Metro

The classic 200 × 100 mm brick tile, flat or bevelled. Timeless on kitchen splashbacks and bathroom walls.

Best for
Splashbacks, period homes
Tiles from
£10–£50 /m²

Mosaic

Small tiles on a mesh sheet, in glass, ceramic, porcelain or stone. They bend round curves and grip well on shower floors.

Best for
Shower floors, niches, features
Tiles from
£20–£150 /m²

Marble

Natural stone such as Carrara and Calacatta, polished or honed. Beautiful, but it must be sealed and doesn't like acidic cleaners.

Best for
Luxury bathrooms, feature walls
Tiles from
£60–£200+ /m²

Travertine, limestone & slate

Natural stone with a warm or rugged look. Every tile is different. Sealed when laid, and resealed every so often.

Best for
Hallways, kitchens, character homes
Tiles from
£30–£100+ /m²

Zellige & handmade

Hand-glazed tiles with uneven edges and colour that shifts tile to tile. Laid with tight joints for that handmade shimmer.

Best for
Splashbacks, statement walls
Price
Premium: quoted per job

Patterned & Victorian

Encaustic-style and Victorian geometric floors, usually in hard-wearing porcelain. Perfect for hallways and porches.

Best for
Hallways, porches, utility rooms
Price
Varies by design

Wood-effect porcelain

Long planks that look like timber but are fully waterproof and fine over underfloor heating. Great in herringbone.

Best for
Kitchens, bathrooms, living areas
Tiles from
£20–£90 /m²

Outdoor 20 mm porcelain

Thick, frost-proof porcelain slabs with a slip-resistant face. Barely stains and needs no sealing.

Best for
Patios, paths, porches
Tiles from
£20–£35 /m²

Terrazzo

Chips of stone or glass set in a base, or a porcelain tile made to look like it. Playful and very hard-wearing.

Best for
Kitchens, bathrooms, commercial
Price
Varies by make

Porcelain slabs

Huge sheets up to around 3200 × 1600 mm, often only 6 mm thick. Almost no grout lines: whole walls, showers and worktops in a single piece.

Best for
Shower walls, feature walls, floors
Price
Quoted per job

Glass

Glass mosaics and tiles that catch the light. Cut with special blades and fixed with white adhesive so the colour stays true.

Best for
Splashbacks, feature strips, pools
Price
Varies by make

Quarry & terracotta

Unglazed clay floor tiles, the traditional red farmhouse floor. Laid on a solid bed and sealed to stop stains.

Best for
Kitchens, porches, period homes
Price
Varies by make

Patterns

The same tile, eight different looks

How tiles are laid changes a room as much as the tile itself. Patterns with more cuts take longer, so they cost a little more to lay.

Choosing your tiles

You pick them at the tile shop. We make sure they're right.

Most customers choose their own tiles at a tile shop. Here's everything to check before you buy, so the tiles suit the room, the right amount arrives, and the job goes perfectly.

Or buy from our tile shop

PORCELAIN · MATTExample box label
Size600 × 600 mm Thickness9 mm EdgeRectified WearPEI 4 SlipR10 Absorption≤ 0.5% Shade07 Batch2614B Box covers1.44 m²
Rectified
Edges ground perfectly square, so tiles can go with a tight 2 mm joint. Non-rectified tiles need wider grout lines.
PEI 1–5
How hard-wearing the glaze is. PEI 1–2 for walls only, PEI 3 for home floors, PEI 4–5 for hallways, kitchens and commercial floors.
R9–R13
Slip rating. R9 is fine for dry floors, R10–R11 for bathrooms, kitchens and outdoors, R12–R13 for commercial kitchens and ramps.
Absorption
How much water the tile soaks up. 0.5% or less is porcelain: best for showers, outdoors and frost.
Shade + batch
The most important thing on the box. Every box must have the same shade and batch number, or the colour can change halfway across the room.
m² per box
How many boxes to buy. Divide the "including extra" figure from our calculator by this number and round up.

Your tile shop checklist

  1. Measure first. Use our calculator for the area and how many tiles, and take the figures with you.
  2. Wall or floor? Floor tiles can go on walls, but wall tiles must never go on floors.
  3. Check the ratings on the box label: PEI for wear, R for slip, absorption for wet areas.
  4. Buy 10% extra, or 15% for herringbone, chevron or diagonal patterns.
  5. Same shade and batch on every box. Ask the shop to check before they load the van.
  6. Pick trims and grout to match, or let us advise on them.
  7. Delivery before day one. Have everything on site before we start.
  8. Keep a spare box for future repairs.

Send us the tile before you buy. We'll check it for free.

Send the tile's name, a photo of the box label or a link, and we'll tell you if it suits the room, what it needs underneath and how many boxes to order. No tile is too difficult for us to fit.

Our work

Recent jobs

A few finished jobs. The best way to judge a tiler is the straightness of the lines and the neatness of the cuts.

These spaces are ready for AR Tiling's own photos.

How it works

How a job runs

  1. Get in touch

    Send a few photos and the rough size of the room, or ask for a visit.

  2. Measure and quote

    Everything measured, then a clear written quote with the price and how long it takes.

  3. Prepare

    Old tiles off, walls boarded, floors levelled and wet areas tanked. This is what makes tiles last.

  4. Set out and tile

    Lines set out from the centre so cuts are even at both ends, then every tile laid true.

  5. Grout and seal

    Grouted, silicone sealed where it meets baths, trays and worktops, then cleaned down.

  6. Walk round

    A final look together before the job is signed off, with the mess cleared away.

Done properly

What goes under the tiles matters most

Most failed tiling isn't the tiles. It's what's underneath: plasterboard in a shower, too little adhesive, no room for movement. Every layer is done right here.

Tile + grout

Set out level, with even joints and cuts at both ends.

Adhesive

Full coverage on floors and large tiles, spread with the right notched trowel, so no hollow spots.

Tanking

A waterproof membrane in showers and wet rooms, sealed at every corner and pipe.

Backer board

Cement or foam board in wet areas, never plain plasterboard.

Movement joints

Gaps left at the edges and over large floors so tiles don't crack as the building moves.

Prices

Price guide

Typical 2026 UK prices outside London, so you know roughly what to budget. Every job still gets its own fixed, written quote after measuring.

Laying tiles (labour, per m²)
WorkPrice
Wall tilingCeramic or porcelain, standard sizes£25–£40
Floor tilingCeramic or porcelain, standard sizes£25–£45
Large-format tiles600 × 600 mm and bigger, with levelling system£35–£55
Mosaic and small tilesMetro, mosaic sheets, under 100 mm£40–£70
Natural stoneMarble, travertine, limestone, slate£40–£65
Herringbone, chevron or diagonalMore cuts and setting out+20–30%
Outdoor porcelainLaid on a prepared base£35–£60
Preparation and extras
WorkPrice
Removing old wall tiles£10–£20 /m²
Removing old floor tiles£15–£30 /m²
Tanking showers and wet rooms£15–£30 /m²
Floor levelling compound£10–£20 /m²
Adhesive, grout and trims£10–£20 /m²
Re-grouting£15–£35 /m²
Typical jobs
JobPrice
Kitchen splashback£150–£400
Re-grout a bathroomfrom £350
Standard bathroom, walls and floorLabour, materials and tanking; tiles extra£1,000–£3,000
Wet room or walk-in showerFully tanked£1,200–£2,500

Prices depend on the room, the tiles and what's underneath. Small jobs have a minimum charge of around £150. Loyal customers get 10% off. Commercial contracts are priced per project. Use the calculator below for a rough budget, then ask for a free quote. [AR Tiling: check these match your own prices before the site goes live]

Finishing touches

Grout, trims and aftercare

The details people notice: the colour of the grout, the edges, and how the tiles look in five years.

Grout

Picked to match or contrast with your tiles.

Bright white Silver grey Mid grey Anthracite Black Beige
  • Standard cement grout for most walls and floors
  • Epoxy grout for showers and worktops: waterproof and stain-proof
  • Flexible grout over underfloor heating and timber floors

Edges and trims

Every exposed edge finished cleanly, with a trim or a mitred corner.

  • Chrome, brushed steel, matt black or brushed brass
  • White or coloured trims to blend in
  • Mitred edges: tiles cut at 45° for a trim-free corner
  • Silicone sealed where tiles meet baths, trays and worktops

Aftercare

Simple care keeps tiles looking new.

  • Leave new grout and silicone at least 24 hours before using a shower
  • Clean with a pH-neutral cleaner; avoid bleach and acid on stone and grout
  • Natural stone resealed every one to two years
  • Re-silicone when it starts to mark or lift

Commercial & contracts

UK-wide contracts. A team ready to go.

From one shop floor to hundreds of bathrooms across a development, our team delivers anywhere in the UK, on programme and to specification.

Housebuilders & developers

Bathrooms, en-suites and kitchens plot by plot, to your programme.

Housing associations

Planned refurbishments, voids and adaptations, including wet rooms.

Hotels & student living

Repeat bathroom pods and en-suites finished to one standard.

Retail & hospitality

Shop fit-outs, restaurants and bars, worked around opening hours.

Offices & public buildings

Washrooms, kitchens, receptions and hard-wearing floors.

Multi-site roll-outs

The same finish across sites up and down the country.

How we run a contract

  1. One contact from tender to handover.
  2. A team sized to the job: [number of tilers] ready to start.
  3. RAMS and method statements before we arrive on site.
  4. Qualified, fully insured tilers working to BS 5385, the British Standard for tiling.
  5. Programme agreed up front, with nights and weekends where needed.
  6. Snagging and sign-off plot by plot, with photos.
  7. Clear valuations and invoices at each stage.
Send us a project to price

Send drawings, a tile schedule and your programme for a fixed contract price.

AR TilingLoyal customer
10% OFF
Every job after your first. For good.

Loyalty plan

Come back to us and save 10% on every job

The plan is simple. Your first job earns you loyal-customer pricing, and it never runs out.

  • First job

    Full quote, done properly. From then on you're an AR Tiling loyal customer.

  • Every job after

    10% off our price, every time. The next room, the kitchen, the patio, the rental flat.

  • Recommend us

    Your friend gets 10% off their first job when they mention your name, and they become a loyal customer too.

  • Landlords

    One account for all your properties. After the first job, every property gets the 10%.

Why it works for you

  • You save on every job you ever book with us
  • The same team who knows your home and your tiles
  • Priority booking for loyal customers

Why it works for us

  • Repeat work from people we already know
  • Fewer adverts, so we pass the saving to you
  • Recommendations from happy customers, our best advert

The 10% comes off AR Tiling's price for labour and the materials we supply. It doesn't apply to tiles you buy yourself, can't be added to other offers, and commercial contracts are priced separately. [AR Tiling: confirm these terms]

Tile calculator

How many tiles, and roughly what will it cost?

Enter the size of the wall or floor and the tile you like. You'll get the number of tiles to buy and a rough budget. Your quote gives the exact figure once the room is measured.

Extra tiles cover cuts, breakages and a few spares for future repairs.
Area to tile
4.32 m²
Tiles to buy
27 tiles
Including extra
4.75 m²
Rough budget
£390–£770

Tiles £100–£430 · adhesive and grout £40–£90 · labour £110–£200

A guide only, for a straightforward job. Removing old tiles, tanking or levelling are extra. Buy all your tiles from the same shade and batch so the colour matches.

Where we work

Based in Greater Manchester. Working UK-wide.

Homes and small businesses across Greater Manchester, and commercial contracts anywhere in the UK.

Homes and businesses

  • Manchester
  • Salford
  • Stockport
  • Trafford
  • Tameside
  • Oldham
  • Rochdale
  • Bury
  • Bolton
  • Wigan

Contracts, UK-wide

  • North West
  • Yorkshire
  • North East
  • Midlands
  • London & South East
  • South West
  • Wales
  • Scotland
  • Northern Ireland

Reviews

What customers say

Review space 1

A real review from a customer, with their first name and area.

Review space 2

A real review from a customer, with their first name and area.

Review space 3

A real review from a customer, with their first name and area.

Ready for real reviews from AR Tiling's customers, for example copied from Google or Facebook with their permission.

FAQs

Questions people ask

How much does tiling cost?

It depends on the size of the area, the tiles you choose and how much preparation is needed underneath. Send a few photos and rough measurements for a free, no-obligation quote.

Do you supply the tiles?

Most customers choose their own tiles at a tile shop. Send us the tile's name or a photo of the box first and we'll check it suits the job and tell you how many boxes to buy, free. [Confirm: can AR Tiling also supply tiles?]

Is any tile or job too difficult?

No. Large-format slabs, natural stone, mosaics, glass, herringbone, wet rooms, outdoor porcelain: whatever you choose, we fit it.

Do you work outside Manchester?

Yes. We do homes and small businesses across Greater Manchester, and commercial contracts anywhere in the UK with our own team.

How does the 10% loyalty discount work?

After your first job, every job you book with us is 10% off our price for labour and the materials we supply. Recommend a friend and they get 10% off their first job too. It doesn't apply to tiles you buy yourself or to commercial contracts, which are priced per project.

Can you take the old tiles off?

Yes. Old tiles are removed and the walls or floor prepared, so the new tiles go onto a sound, flat surface.

How long will my job take?

It depends on the size and the preparation. Your quote says how many days the job will take before any work starts.

Can you tile over underfloor heating?

Yes, using flexible adhesive and grout made for heated floors, with the heating off while it sets.

Do you do small jobs?

Yes: splashbacks, re-grouting, replacing cracked tiles and other small repairs as well as full rooms. Small jobs have a minimum charge of around £150.

Ceramic or porcelain: which should I choose?

Ceramic is great for walls and costs less. Porcelain is harder and soaks up almost no water, so it's the better choice for floors, showers, wet rooms and anywhere with underfloor heating.

Can you tile over my old tiles?

Sometimes, if the old tiles are flat and stuck down firmly. In showers, wet rooms and on most floors it's better to take them off, so the new tiles bond properly and last.

How soon can I use my shower?

Leave new grout and silicone at least 24 hours before using the shower. If a job needs longer, your quote will say so.

Do my tiles need sealing?

Porcelain and glazed ceramic don't. Natural stone such as marble, travertine and limestone does, when it's laid and every one to two years after that.

Does herringbone cost more?

Yes, a little. Herringbone, chevron and diagonal patterns take more cuts and setting out, so laying costs around 20 to 30% more, and you'll need about 15% extra tiles instead of 10%.

Free quote

Tell us about the job

Homes, businesses and contracts, anywhere in the UK. Photos, rough sizes and the tile you've chosen help us give you an accurate price quickly.

Call or text
[Phone number]
Email
[Email address]
Tiler
[Name], AR Tiling
Working hours
[e.g. Mon to Sat, 8am to 6pm]
Call: [Phone] Free quote